411 Karrier van ‘Lucozade’ Label Set


411 Karrier van ‘Lucozade’ Label Set - Trimming Required!
ToyResto.com Application Tip: - Wash your hands before installation! This label must be trimmed to size, using very sharp scissors, cut just outside of the black line. These self-adhesive labels are very unforgiving, you do not want to bend them or place them in the wrong spot, it is almost impossible to move them without damaging or having a corner lifting up. To remove from backing DO NOT bend corner of label away from backing, instead very carefully, starting at a corner, remove backing from label, by using your fingernail to 'catch' the edge of the backing, this will help prevent the label corner from 'memorizing' a bend. Always do your best to try to keep from touching the adhesive, the dirt and/or oil on your fingers will cause the adhesive to fail, handle on the edges only or keep part of the backing on until final installation. When installing, after carefully removing from backing, I place one edge of the label on the model at about a 45 degree angle, to line it up without making a 'commitment'. Once straight I'll either use a fingernail or one end of plastic tweezers to hold the label at that first edge straight and gently lay it down in place, then very carefully smooth it out while pressing down for final adhesion. Dry skin on your fingertip can be enough to scratch a decal or label, so use something soft for final application.

Sold Out
  • Model: 45-411LCZ
  • Shipping Weight: 0.01lbs
  • 0 Units in Stock
  • Manufactured by: Corgi

This product was added to our catalog on Sunday 18 March, 2012.

Your IP Address is:
Copyright © 2018 ToyResto.com. Powered by ZiaCart