13D Dodge Wrecker "BP" Label Set


13D Dodge Wrecker "BP" Label Set - Self Adhesive Labels
Please Note: This is a square label, you will have to cut the appropriate corner depending on which side you are installing the label, for the 'notch' in the BP logo on the side of the wrecker.
Application: - This is a self-adhesive lable cut to size. Gently remove from backing being very careful to NOT bend a corner while removing, it is hard to stick a bent-up corner back down.
ToyResto.com Application Tip: - These self-adhesive labels are very unforgiving, you do not want to bend them or place them in the wrong spot, it is almost impossible to move them without damaging. When installing, after carefully removing from backing, I place one edge of the label on the model, at about a 45 degree angle, to line it up without making a 'commitment'. Once straight I'll either use a fingernail or one end of plastic tweezers to hold the label at that first edge and gently lay it down in place, then very carefully smooth it out while pressing down for final adhesion. Dry skin on yoru fingertip can be enough to scratch a decal or label so use something soft for final application.

Add to Cart:

  • Model: 04-13DBPL
  • Shipping Weight: 0.01lbs
  • 2 Units in Stock
  • Manufactured by: Matchbox

This product was added to our catalog on Wednesday 22 February, 2012.

Your IP Address is:
Copyright © 2017 ToyResto.com. Powered by ZiaCart