Y6/1 AEC Osram Lamps Decal Set - Screen Printed


Matchbox YesterYear Y6/1 AEC Osram Lamps Decal Set - Screen Printed Waterslide - No trimming needed
Application: - Soak in clean water 30-60 seconds or until loose on backing, but not so long that it floats off of the backing on its own. To make positioning easier pre-wet the surface your decal is going on, remove decal from water still on backing, slide one edge off of backing and onto model, gently hold decal in place on model and carefully pull backing away laying the decal down as you go (i.e. If you are right handed, slide the decal off of the backing to the left, and hold decal carefully on model with your left thumb, as you slowly pull the backing away, laying decal on model as you go). Position decal carefully, then using a soft paper towel or tissue, start at middle of decal and work out one direction smoothing air bubbles and water as you go and sopping up excess water, then do other side. Now the hard part, leave it alone! Let the decal dry before handling, 24 hours is best.

Sold Out
  • Model: 30-Y6/1OL
  • Shipping Weight: 0.01lbs
  • 0 Units in Stock
  • Manufactured by: Matchbox

This product was added to our catalog on Friday 18 January, 2013.

Your IP Address is:
Copyright © 2018 ToyResto.com. Powered by ZiaCart